VIVOTEK’s FE8182 is a recessed-mount fisheye network camera, featuring a detailed 5-Megapixel resolution sensor with superb image quality. A small camera with large functionality, VIVOTEK’s FE8182, with a diameter of only 60 mm, is truly an all-in-one surveillance solution that meets a wide variety of needs for indoor surveillance. Equipped with a fisheye lens for 180° panoramic view (wall mount) or 360° surround view without blind spots (ceiling/floor mount), the camera is able to provide full video coverage of wide, open areas, such as airport lobbies, shopping malls, retail stores, offices and more.
The FE8182 offers various display layouts, including original surround view, panoramic view, and regional view to suit a variety of applications. In addition, in both the panoramic and regional viewing modes, users can utilize the ultra-smooth ePTZ function to effortlessly zoom in and focus on a region of interest (ROI). Further, a new cutting-edge pixel calculation function helps users to ensure high image quality for a designated area.
At the darker end of the spectrum, 3D Noise Reduction Technology allows users to enjoy an increased level of image detail in extremely dim environments without consuming or wasting unreasonably high bandwidth. To dramatically reduce file sizes and conserve valuable network bandwidth, the FE8182 supports Smart Stream and industry-standard H.264 compression technology. Further, the recessed-mount design allows users to install the camera without the need for screws. The FE8182 is not just perfect for blending into any surroundings or any roof space, but also produces substantial savings on both cost and time.
|CPU||Multimedia SoC (System-on-Chip)|
|Image Sensor||1/3.2" Progressive CMOS|
|Focal Length||f = 1.05 mm|
|Field of View||
|Shutter Time||1/5 sec. to 1/32,000 sec.|
|WDR Technology||WDR Enhanced|
|Minimum Illumination||0.6 Lux @ F2.0 (Color)|
4x digital zoom IE plug-in
Slot type: Micro SD/SDHC/SDXC card slot
|Compression||H.264 & MJPEG|
|Maximum Frame Rate||15 fps @ 1920x1920|
|Maximum Streams||3 simultaneous streams|
|S/N Ratio||64.4 dB|
|Dynamic Range||69.4 dB|
|Video Streaming||Adjustable resolution, quality and bitrate; Smart Stream|
|Image Settings||Adjustable image size, quality and bit rate; Time stamp, text overlay, flip & mirror; Configurable brightness, contrast, saturation, sharpness, white balance, exposure control, gain, backlight compensation, privacy masks; Scheduled profile settings, 3D noise reduction|
|Audio Capability||One-way Audio|
|Effective Range||5 Meters|
|Users||Live viewing for up to 10 clients|
|Protocols||IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1X, UDP, ICMP, ARP, SSL, TLS, CIFS/SMB|
10 Base-T/100 BaseTX Ethernet (RJ-45)
*It is highly recommended to use standard CAT5e & CAT6 cables which are compliant with the 3P/ETL standard.
|ONVIF||Supported, specification available at www.onvif.org|
|Video Motion Detection||Five-window video motion detection|
|Alarm and Event|
|Alarm Triggers||Motion detection, manual trigger, periodical trigger, system boot, recording notification, camera tampering detection, audio detection|
|Alarm Events||Event notification using HTTP, SMTP, FTP, NAS server and SD Card|
|Connectors||RJ-45 for Network/PoE connection|
|LED Indicator||System power and status indicator|
|Power Input||IEEE 802.3af PoE Class 1|
|Power Consumption||Max. 3 W|
|Dimensions||Ø 60 x 102.5 mm|
|Safety Certifications||CE, LVD, FCC Class B, VCCI, C-Tick, UL|
Starting Temperature: 0°C ~ 40°C (32°F ~ 104°F)
Working Temperature: -10°C ~ 40°C (14°F ~ 104°F)
|Operating System||Microsoft Windows 7/8|
Internet Explorer 10/11
Chrome version 58.0.3029 or above
VLC: 1.1.11 or above
QuickTime: 7 or above
|Others||Quick installation guide, warranty card|
A fisheye lens (FE8182) can be used to cover an entire space, while a fixed focal lens (FD816C-HF2) a specific field of view. The two sensor modules can be installed in the same or different rooms/mounting positions.
Use the M3 self tapping screws if installed without the retention tube. Note that this type of installation does not apply to hard surfaces, such as a concrete wall.
6-1 Use a small-size Phillips screwdriver to change the shooting angle of a fixed focal lens.
6-2. Attach the top cover to camera by aligning the notch. The magnets will hold the cover in place.